If your launcher will only turn on when plugged into the charger and/or the battery will not charge, it can often be due to a loose connection between the battery and the launcher. To check and fix the connection, follow the steps below:
*Please note: The Slinger Launcher is designed to operate on battery power only. Using the Launcher while it is plugged into an electrical outlet may cause irreparable damage to the circuit board.
1. Ensure the launcher is NOT CONNECTED to the charger and the power switch on the launcher is TURNED OFF.
2. Remove the 4 thumb screws at the bottom-left of the bag.
3. Slowly pull the battery from the bag.
4. If disconnected, gently pull the cable inside the bag and connect it to the battery.
5. Slide the battery pack back into the launcher and secure it with the 4 screws.
6. Test the launcher.
For a visual guide, watch this video on how to remove the battery:
If these steps do not resolve the issue, please contact our support team for further assistance.
Email: support@slingerbag.com
Live chat: www.slingerbag.com
Tel or Text: 856-617-5931
Comments
0 comments
Please sign in to leave a comment.