Fixing Ball Jams in the Pickleball Launcher

We recognize that facing problems with your equipment, particularly a ball jam, can be an interruption to your training.

Given the variety of Pickleballs available on the market, each made from different materials and with varying dimensions and hardness levels, it is possible to experience occasional ball jams in the launching wheels.

To Remove a ball jam, please review the following video & steps:

1. Ensure the launcher is in the OFF position before starting .
2. Extend the elevation knob all the way to 40 degrees and tighten the elevation knob in this position.
3. With a protective glove on the right hand, reach in the opening behind the elevation knob into the      launching chute until you can touch the back of the jammed pickleball.
4. Continue to apply pressure to the back of the pickleball with your right hand. With your left hand, spin the lower launching wheel forward to manually remove the ball through the launching chute.

If you have any questions or concerns about this process, please contact a member of our dedicated support team via email, live chat or telephone and we will happily assist you begin your Slinger journey.

Email: support@slingerbag.com 
Live chat: www.slingerbag.com 
Tel or Text: 856-617-5931